Portcullis Perimeter Security - NSW Australia

Arguably the single most important fire safety mechanism, electromagnetic door holders guard against the lethal spread of toxic smoke and fumes – by far the greatest cause of death in fires.
The Vimpex range of door holders offers the installer the broadest choice of mounting styles, holding power and installation accessories.
Mounted onto a fixed surface, these door holders ensure retention of the fire door by means of a smart metallic keeper plate. Interfaced with the fire alarm system, the door holders are de-energised as soon as the fire is detected thus releasing the door without the potentially harmful delay suffered by other types of devices.
All Vimpex door holders feature metal enclosures to guard against heat fatigue - a problem associated with lower quality, plastic enclosures.

Conforms to BS EN1155 – Building Hardware – Electrically powered hold-open devices for swing doors.
General Features

• Choice of holding power, 200-1000N
• Various styles and mounting methods available including heavy duty, wall mounted and universal units
• Standard units feature strong back box
• Heavy duty, high power versions stocked
• Integrated release button as standard
• Remote release buttons available

Standard Door Holders

• Supplied as standard with 200N holding strength
• Attractive finish, featuring a strengthened cast back box
• Metal enclosure means no heat fatigue
• Available in 230Vac and 24Vdc
• Flush mounted versions and units with a greater
• Holding force also available

Universal Door Holders
These rugged and versatile door holders can be used for many different door holding applications. Universal Door Holders can be either floor or wall mounted.
Available in two standard lengths - 200 or 300mm, there is also a choice of two holding forces - 500 or 1000N. Please check the technical data for exact dimensions according to wall or floor configuration.

Waterproof Door Holder
This robust waterproof unit is ideal for external use.

• Robust steel construction
• 1200N holding force
• Sealed against water ingress (IP65)
• 24Vdc and 230Vac versions available
• Supplied with keeper plate
• Terminated via IP65 connector (supplied)

Heavy Duty Door Holders

• Two versions available: wall mounted and floor mounted
• Heavy duty casting is vandal resistant
• Two holding forces available - 200N and 500N
• Designed for areas where accidental damage or vandalism is a problem
• Ideal for environments such as schools, hospitals, warehouses, car parks

Decorative Door Holders
These attractive door holders are ideal for prestigious installations which demand high spec. fittings. These units, available in chrome, stainless steel or brass-look finishes are supplied either with or without release buttons and with matching keeper plates.
These magnets fit directly to a standard single-gang electrical back box, which enables the unit to be easily flush-mounted. If surface mounting is necessary, then colour-matched kits can be used to conceal the surface mounted box. These are supplied with two 200mm entry holes and blanking.


Release Buttons
Sometimes an auxiliary release switch can be useful. This is particularly the case in care homes, where a resident may need to easily ensure privacy or for buildings such as cinemas and theatres where the fire door needs to be open only some of the time.

Documents:
Datasheet

Door Holder Family

Standard Holder
Flush Mount

Standard Holder
Surface Mount

Universal Door Holder

Waterproof
Door Holders

Heavy Duty
Door Holders

Decorative
Door Holders

Release Buttons