Portcullis Perimeter Security - NSW Australia

Fire Alarm Bells

The bell remains the most commonly used alarm for fire evacuation systems. Recognising this, Vimpex continue to innovate with their all-aluminium range of fire alarm bells.
Five bells make up the range of 150mm (6 inch) and 200mm (8 inch) internal and external units. Being of aluminium construction, our bells have a very high volume output matched with extremely low power consumption - just 11mA for the 150mm internal.
The specially designed weatherproof bells have an aluminium back box giving either single or double threaded entry for maximum flexibility in installation. This is supplied as a full fixing kit with gasket and screws.
As with the Vimpex sounder range, all bells can be supplied branded with your company logo.

Combined Fire Bell & Strobe

A combined bell and strobe with high sound and light output to assist in the design of DDA-compliant fire systems.
Using the market leading aluminium gong for excellent sound output and a clear lens to maximise light output. The Vimpex StroBell is ideal for installations that call for a traditional bell tone but require visual alarm indication as well.
As with the Vimpex sounder range, all bells can be supplied branded with your company logo.

• Utilises market-leading bell design

• Ultra bright strobe in clear lens for maximum light output

• Familiar installation method

• Selectable flash rate - 30/60 per minute

• Low current consumption

• Single point of installation minimises wiring and associated costs

Easy AV™-U

The universal EasyAV™-U is the smart way to convert existing installations of 6” fire alarm bells and the majority of electronic sounders to DDA-compliant bell/sounder beacon combinations.
The EasyAV™-U is an ingenious beacon ring that retrofits onto existing products without the need to change the wiring or replace the installed unit.
The EasyAV™-U is supplied with handy flying leads that allow quick and easy installation in about 5 minutes - all you need is a screwdriver.
EasyAV™-U incorporates a high output dual strength LED beacon with two selectable flash rates. As it is powered from the sounder circuit, Easy AV™-U requires no additional power supplies. Its low current consumption means that in most cases the existing sounder circuit supply current will be sufficient without the need to upgrade power supplies.

• Easy to install in less than 3 minutes

• No need to replace existing product or wiring

• High output dual strength LED beacon

• Unique solution for DDA compliance

• Selectable flash mode and rate

• Low power consumption

Datasheets/Documents

Bell Datasheet

StroBell Data

Easy AV Data

Accessories

Internal Fire Alarm Bell

Weatherproof Alarm Bell

Strobell

Easy AV-U